Curriculum Vitae

Bjørn Clausen, Ph.D., M.Sc., B.Sc.
MST-8, Scientist 3
SMARTS Instrument Scientist
Los Alamos National Laboratory
P.O. Box 1663, Mail Stop H805
Los Alamos, NM 87545

Office: +1 (505) 667-2944
Cell: +1 (505) 695-5294
Fax: +1 (505) 665-2676
E-mail: clausen@lanl.gov
Web: http://public.lanl.gov/clausen/
FTP: ftp://ftp.lanl.gov/public/clausen/
Bjorn Clausen

Research Experience and Interests

Dr. Clausen has been Instrument Scientist for SMARTS, the engineering neutron diffraction instrument at the Lujan Center at LANSCE, for more than a decade. His research interests are focused on determining structure-property relationship for LANL mission relevant materials and composites via constitutive modeling and experimental validation. His experience includes development of self-consistent crystal plasticity based polycrystal deformation models, finite element modeling, mechanical testing, in-situ neutron and synchrotron X-ray diffraction measurements of phase fractions, strains, dislocation densities and texture.

Professional Experience

October 2014 to present:
Staff Scientist, SMARTS Instrument Scientist; Materials Science in Radiation and Dynamics Extremes (MST-8), Los Alamos National Laboratory, Los Alamos, New Mexico, USA.
October 2002 to September 2014:
Staff Member, SMARTS Instrument Scientist; Lujan Center, Los Alamos National Laboratory, Los Alamos, New Mexico, USA.
January 2001 to October 2002:
Senior Postdoctoral Scholar in Material Science; California Institute of Technology, Pasadena, California, USA.
July 2002 to September 2002:
Visiting Faculty Affiliate; T-3 (Computational Fluid Dynamics), Los Alamos National Laboratory, Los Alamos, New Mexico, USA.
July 2001 to September 2001:
Visiting Faculty Affiliate; MST-8 (Structure/Property Relations), Los Alamos National Laboratory, Los Alamos, New Mexico, USA.
September 1997 to December 2000:
Postdoctoral Research Associate; Manuel Lujan Jr. Neutron Scattering Center, Los Alamos National Laboratory, Los Alamos, New Mexico, USA.
April 1997 to September 1997:
Graduate Research Assistant; Manuel Lujan Jr. Neutron Scattering Center, Los Alamos National Laboratory, Los Alamos, New Mexico, USA.

Education

February 1994 to September 1997:
Ph.D. in Mechanical Engineering/Materials Science; Technical University of Denmark/ Risø National Laboratory. Thesis: "Characterisation of Polycrystal Deformation by Numerical Modelling and Neutron Diffraction Experiments." (RIS-R-985.pdf)
September 1991 to July 1993:
M.Sc. in Mechanical Engineering; Aalborg University. Thesis: Basic Research in Platelet Reinforced Ceramics.
February 1988 to February 1991:
B.Sc. in Mechanical Engineering; Aarhus Teknikum. Thesis: Construction/Optimization of a Crane.

Publications

  1. D.W. Brown, K.D. Clarke, B. Clausen, C.N. Tupper, S. Vogel and E. Zepeda-Alarcon, "Evolution of Texture and Deformation Mechanisms During Repeated Deformation and Heat Treating Cycles of U-6Nb", Metal. Mater. Trans. A, vol. 52, pp 2195-2207, 2021. (DOI)
  2. J.A. Evans, B.T. Sturtevant, B. Clausen, S.C. Vogel, F.F. Balakirev, J.B. Betts, L. Capolungo, R.A. Lebensohn and B. Maiorov, "Determining elastic anisotropy of textured polycrystals using resonant ultrasound spectroscopy", J. Mater. Sci., vol. 56, pp. 10053-10073, 2021. (DOI)
  3. V.K.Mehta, S.C.Vogel, A.P.Shivprasad, E.P.Luther, D.A.Andersson, D.V.Rao, D. Kotlyar, B. Clausen and M.W.D. Cooper, "A density functional theory and neutron diffraction study of the ambient condition properties of sub-stoichiometric yttrium hydride", J. Nucl. Mater., vol. 547, 152837, 2021. (DOI)
  4. B. Clausen, C.R. D’Elia, M.B. Prime, M.R. Hill, J.E. Bishop, K.L. Johnson, B.H. Jared, K.M. Allen, D.K. Balch, R.A. Roach and D.W. Brown, "Complementary Measurements of Residual Stresses Before and After Base Plate Removal in an Intricate Additively-Manufactured Stainless-Steel Valve Housing", Add. Man., vol. 36, 101555, 2020. (DOI)
  5. N.E. Peterson, D. Malta, S.C. Vogel, B. Clausen, S. Jana, V.V. Joshi and S.R. Agnew, "The role of ternary alloying elements in eutectoid transformation of U–10Mo alloy part II. In and ex-situ neutron diffraction-based assessment of eutectoid phase transformation kinetics in U-9.8Mo-0.2X alloy (X = Cr, Ni or Co)", J. Nucl. Mater., vol. 540, 152383, 2020. (DOI)
  6. A.J. Clarke, J. Klemm-Toole, K.D. Clarke, D.R. Coughlin, D.T. Pierce, V.K. Euser, J.D. Poplawsky, B. Clausen, D. Brown, J. Almer, P.J. Gibbs, D.J. Alexander, R.D. Field, D.L. Williamson, J.G. Speer and G, Krauss, "Perspectives on Quenching and Tempering 4340 Steel", Metal. Mater. Trans. A, vol. 51 (10), pp 4984-5005, 2020. (DOI)
  7. T.J. Barrett, R.J. McCabe, D.W. Brown, B. Clausen, S.C. Vogel and M. Knezevic, "Predicting deformation behavior of α-uranium during tension, compression, load reversal, rolling, and sheet forming using elasto-plastic, multi-level crystal plasticity coupled with finite elements", J. Mech. Phys. Solids, vol. 138, 103924, 2020. (DOI)
  8. I.C. Noyan, J.R. Bunn, M.K. Tippett, E.A. Payzant, B. Clausen and D.W. Brown, "Experimental determination of precision, resolution, accuracy and trueness of time-of-flight neutron diffraction strain measurements", J. appl. Cryst., vol. 138, 103924, 2020. (DOI)
  9. A.J. Clarke, D.W. Brown, B. Clausen, T.A. Sisneros and R.D. Field, "Reversion of Post-Shape Memory Effect Twins During Unloading of Uranium-6 wt pct Niobium", Metal. Mater. Trans. A, vol. 51(4), pp. 1614-1624, 2020. (DOI)
  10. D.W. Brown, A. Losko, J.S. Carpenter, B. Clausen, J.C. Cooley, V. Livescu, P. Kenesei, J.-S. Park, T.J. Stockman and M. Strantza, "In-Situ High-Energy X-ray Diffraction During a Linear Deposition of 308 Stainless Steel via Wire Arc Additive Manufacture", Metall. Mater. Trans. A, vol. 51, pp. 1379-1394, 2020. (DOI)
  11. R. Pokharel, R.A. Lebensohn, D.C. Pagan, T.L. Ickes, B. Clausen, D.W. Brown, C.-F. Chen, D.S. Dale and J.V. Bernier, "In-Situ Grain Resolved Stress Characterization During Damage Initiation in Cu-10%W Alloy", JOM, vol. 70(1), pp. 48–56, 2020. (DOI)
  12. D.W. Brown, D.P. Adams, L. Balogh, J.S. Carpenter, B. Clausen, V. Livescu, R.M. Martinez, B.M. Morrow, T.A. Palmer, R. Pokharel, M. Strantza, and S.C. Vogel, "Using In Situ Neutron Diffraction to Isolate Specific Features of Additively Manufactured Microstructures in 304L Stainless Steel and Identify Their Effects on Macroscopic Strength", Metall. Trans. A, vol. 50, pp. 3399–3413, 2019. (DOI)
  13. T.Q. Phan, M. Strantza, M.R. Hill, T.H. Gnaupel‑Herold, J. Heigel, C.R. D’Elia, A.T. DeWald, B. Clausen, D.C. Pagan, J.Y.P. Ko, D.W. Brown and L.E. Levine, "Elastic Residual Strain and Stress Measurements and Corresponding Part Deflections of 3D Additive Manufacturing Builds of IN625 AM‑Bench Artifacts Using Neutron Diffraction, Synchrotron X‑Ray Diffraction, and Contour Method", Integr. Mater. Manuf. Innov., vol. 8(3), pp. 318–334, 2019. (DOI)
  14. R. Pokharel, A. Patra, D.W. Brown, B. Clausen, , S.C. Vogel and G.T. Gray III, "An analysis of phase stresses in additively manufactured 304L stainless steel using neutron diffraction measurements and crystal plasticity finite element simulations", Int. J. Plast., vol. 121, pp. 201-217, 2019. (DOI)
  15. J. Zhang, F.J. Freibert, B. Clausen, A.I. Smith, S.C. Vogel and D.W. Brown, "Equation of state and strain-induced stabilization of δ-phase stabilized plutonium alloys", J. Nucl. Mater., vol. 524, pp. 54-59, 2019. (DOI)
  16. D.W. Brown, D.P. Adams, L. Balogh, J.S. Carpenter, B. Clausen, V. Livescu, R.M. Martinez, B.M. Morrow, T.A. Palmer, R. Pokharel, M. Strantza and S.C. Vogel, "Using In Situ Neutron Diffraction to Isolate Specific Features of Additively Manufactured Microstructures in 304L Stainless Steel and Identify Their Effects on Macroscopic Strength", Metall. Trans. A, vol. 50(7), pp.3399-3413, 2019. (DOI)
  17. J. Zhang, D.W. Brown, B. Clausen, S.C. Vogel and R.E. Hackenberg, "In Situ Time-Resolved Phase Evolution and Phase Transformations in U-6 Wt Pct Nb", Metall. Mat. Trans. A, vol. 50(6), pp. 2619-2628, 2019. (DOI)
  18. A. Glover, P.J. Gibbs, C. Liu, D.W. Brown, B. Clausen, J.G. Speer and E. De Moor, "Deformation behavior of a double soaked medium manganese steel with varied martensite strength", Metals, vol. 9(7),761, 2019. (DOI)
  19. G.M. Hommer, J.-S. Park, Z.D. Brunson, J. Dahal, P. Kenesei, A. Mashayekhi, J.D. Almer, J. Vignes, S.R. Lemmer, B. Clausen, D.W. Brown, A.P. Stebner, "A Planar Biaxial Experiment Platform for In Situ High-Energy Diffraction Studies", Exp. Mech., vol. 6, 100328, 2019. (DOI)
  20. T.J. Barrett, A. Eghtesad, R.J. McCabe, B. Clausen, D.W.Brown, S.C. Vogel and M. Knezevic, "A generalized spherical harmonics-based procedure for the interpolation of partial datasets of orientation distributions to enable crystal mechanics-based simulations", Materialia, vol. 138, 103924, 2019. (DOI)
  21. J. Zhang, B. Clausen, A.I. Smith, F.J. Freibert, S.C. Vogel and D.W. Brown, "Line profile analysis of dislocation densities of the δ-phase 239Pu-2.0 at% Ga alloy using neutron diffraction", Journal of Nuclear Materials, vol. 517, pp. 152-156, 2019. (DOI)
  22. D.W. Brown, A. Losko, J.S. Carpenter, J.C. Cooley, B. Clausen, J. Dahal, P. Kenesei and J.-S. Park, "Microstructure Development of 308L Stainless Steel During Additive Manufacturing", Metall. Mater. Trans. A, vol. 50(5), pp. 2538–2553, 2019. (DOI)
  23. R.K. Ganeriwala, M. Strantza, W.E. King, B. Clausen, T.Q. Phan, L.E. Levine, D.W. Brown and N.E. Hodge, "Evaluation of a thermomechanical model for prediction of residualstress during laser powder bed fusion of Ti-6Al-4V", Additive Manufacturing, vol. 27, pp. 489-502, 2019. (DOI)
  24. D. Drozdenko, J. Čapek, B. Clausen, A. Vinogradov and K. Máthis, "Influence of the solute concentration on the anelasticity in Mg-Al alloys: a multiple-approach study", J. Alloys and Comp., vol. 786, pp. 779-790, 2019. (DOI)
  25. M. Arul Kumar, B. Clausen, L. Capolungo, R.J. McCabe, W. Liu, J.Z. Tischler and C.N. Tomé, "Deformation Twinning and Grain Partitioning in a Hexagonal Close-Packed Magnesium Alloy", Nature Communications, vol. 9, 4761, 2018. (DOI)
  26. M. Strantza, R.K. Ganeriwala, B. Clausen, T.Q. Phan, L.E. Levine, D. Pagan, W.E. King, N.E. Hodge and D.W. Brown, "Coupled experimental and computational study of residual stresses in additively manufactured Ti-6Al-4V components", Mat. Lett., vol. 231, pp. 221-224, 2018. (DOI)
  27. R. Pokharel, L. Balogh, D.W. Brown, B. Clausen, G.T. Gray, V. Livescu, S.C. Vogel and S. Takajo, "Signatures of the unique microstructure of additively manufactured steel observed via diffraction", Scripta Mater., vol. 155, pp. 16-20, 2018. (DOI)
  28. J. Zhang, S. Vogel, D.W. Brown, B. Clausen and R. Hackenberg, "Equation of State, Phase Stability, and Phase Transformations of Uranium-6 wt. % Niobium under High Pressure and Temperature", J. Appl. Phys, vol. 123, 175103, 2018. (DOI)
  29. S. Takajo, D.W. Brown, B. Clausen, G.T. Gray, C.M. Knapp, D.T. Martinez, C.P. Trujillo and S.C. Vogel, "Spatially Resolved Texture and Microstructure Evolution of Additively Manufactured and Gas Gun Deformed 304L Stainless Steel Investigated by Neutron Diffraction and Electron Backscatter Diffraction", Powder Diffraction, 1-6, 2018. (DOI)
  30. D.E. Nicholson, O. Benafan, S. A. Padula II, B. Clausen and R. Vaidyanathan, "Loading Path and Control Mode Effects During Thermomechanical Cycling of Polycrystalline Shape Memory NiTi", Shape Memory and Superelasticity, vol. 4(1), pp. 143-157, 2018. (DOI)
  31. S.-Y. Lee, S. Coratella, A. Brügger, B. Clausen, D.W. Brown, K. Langer M.E. Fitzpatrick and I.C. Noyan, "Boundary Effects in the Eigenstrain Method", Experimental Mechanics, vol. 58(5), pp. 799-814, 2018. (DOI)
  32. R. Pokharel, D.W. Brown, B. Clausen, D.D. Byler, T.L. Ickes, K.J. McClellan, R.M. Suter, and P. Kenesei, "Non-Destructive Characterization of UO2+x Nuclear Fuels", Microscopy Today, vol. 25(6), pp. 42-47, 2017. (DOI)
  33. S.R. Agnew, A. Singh, C.A. Calhoun, R.P. Mulay, J.J. Bhattacharyya, H. Somekawa, T. Mukai, B. Clausen and P.D. Wu, "In-situ neutron diffraction of a quasicrystal-containing Mg alloy interpreted using a new polycrystal plasticity model of hardening due to {10.2} tensile twinning", Int. J. Plast., vol. 100, pp. 34-51, 2018. (DOI)
  34. D.W. Brown, D.P. Adams, L. Balogh, J.S. Carpenter, B. Clausen, G. King, B. Reedlunn, T.A. Palmer, M. Maguire and S.C. Vogel, "In-Situ Neutron Diffraction Study of the Influence of Microstructure on the Mechanical Response of Additively Manufactured 304L Stainless Steel", Metall. Mater. Trans. A, vol. 48(12), pp. 6055-6069, 2017. (DOI)
  35. D.J. Luscher, J.D. Yeager, B. Clausen, S.C. Vogel, A.L. Higginbotham Duque and D.W. Brown, "Using Neutron Diffraction to Investigate Texture Evolution During Consolidation of Deuterated Triaminotrinitrobenzene (d-TATB) Explosive Powder", Crystals, vol. 7(5), 138, 2017. (DOI)
  36. B. Clausen, D.W. Brown, J.S. Carpenter, K.D. Clarke, A.J. Clarke, S.C. Vogel, J.D. Bernardin, D. Spernjak, and J.M. Thompson, "Deformation Behavior of Additively Manufactured GP1 Stainless Steel", Mat. Sci. Eng. A, vol. 696, pp. 331-340, 2017. (DOI)
  37. J Čapek, K Máthis, B. Clausen and Matthew Barnett, "Dependence of Twinned Volume Fraction on Loading Mode and Schmid Factor in Randomly Textured Magnesium", Acta Mater., vol. 130, pp. 319-328, 2017. (DOI)
  38. W. Woo, Z. Feng, B. Clausen and S.A. David, "In Situ Neutron Diffraction Analyses of Temperature and Stresses during Friction Stir Processing of Mg-3Al-1Zn Magnesium Alloy", Mater. Lett., vol. 196, pp. 284–287, 2017. (DOI)
  39. K Máthis, J Čapek, B. Clausen and T. Panzner, "Influence of the Loading Path on the Deformation Mechanisms of Magnesium Alloys", Solid State Phen., vol. 258, pp. 427-431, 2017. (DOI)
  40. A.S. Wu, D.W. Brown, B. Clausen and J.W. Elmer, "The influence of impurities on the crystal structure and mechanical properties of additive manufactured U–14 at.% Nb", Scripta Mat., vol. 130, pp. 59–63, 2017. (DOI)
  41. D.W. Brown, M.A. Okuniewski, T.A. Sisneros, B. Clausen, G.A. Moore and L. Balogh, "Neutron Diffraction Measurement of Residual Stresses, Dislocation Density and Texture in Zr-Bonded U-10Mo “Mini” Fuel Foils and Plates", Journal of Nuclear Materials, vol. 482, pp 63–74, 2016. (DOI)
  42. C.-F. Chen, R. Pokharel, M.J. Brand, E.L. Tegtmeier, B. Clausen, D.E. Dombrowski, T.L. Ickes and R.A. Lebensohn, "Processing and Consolidation of Copper/Tungsten", J. Mater. Sci., vol. 678 pp. 291–298, 2016. (DOI)
  43. G. Song, Z. Sun, L. Li, B. Clausen, S.Y. Zhang, Y. Gao and P.K. Liaw, "High Temperature Deformation Mechanism in Hierarchical and Single Precipitate Strengthened Ferritic Alloys by In Situ Neutron Diffraction Studies", Sci. Rep., vol. 7, 45965, 2017. (DOI)
  44. H. Wang, L. Capolungo, B. Clausen and C.N. Tomé, "A Crystal Plasticity Model Based on Transition State Theory", Int. J. Plast., vol. 93, pp. 251-268, 2017. (DOI)
  45. D.W. Brown, J.D. Bernardin, J.S. Carpenter, B. Clausen, D. Spernjak and J.M. Thompson, "Neutron Diffraction Measurements of Residual Stress in Additively Manufactured Stainless Steel", Mat. Sci. Eng. A, vol. 678, pp. 291-298, 2016. (DOI)
  46. G. Song, Z. Sun, B. Clausen and P.K. Liaw, "Microstructural Characteristics of a Ni2TiAl-Precipitate-Strengthened Ferritic Alloy", J. Alloys Compounds, vol. 693, pp. 921-928, 2017. (DOI)
  47. S.A. Chester, J.V. Bernier, N.R. Barton, L. Balogh, B. Clausen and J.K. Edmiston, "Direct Numerical Simulation of Deformation Twinning in Polycrystals", Acta Mater. , vol. 120, pp. 348-363, 2016. (DOI)
  48. A.A. Saleh, B. Clausen, D.W. Brown, E.V. Pereloma, C.H.J. Davies, C.N. Tomé and A.A. Gazder, "On the Feasibility of Partial Slip Reversal and De-Twinning during the Cyclic Loading of TWIP Steel", Mater. Lett., vol. 182, pp. 294–297, 2016. (DOI)
  49. J.D. Yeager, D.J. Luscher, S.C. Vogel, B. Clausen and D.W. Brown, "Neutron Diffraction Measurements and Micromechanical Modelling of Temperature-Dependent Variations in TATB Lattice Parameters", Propellants, Explosives, Pyrotechnics , vol. 41(3), pp. 514–525, 2016. (DOI)
  50. C. Tomchik, J. Almer, O. Anderoglu, L. Balogh, D.W. Brown, B. Clausen, S.A. Maloy, T.A. Sisneros and J.F. Stubbins, "High Energy X-ray Diffraction Study of the Relationship Between the Macroscopic Mechanical Properties and Microstructure of Irradiated HT-9 Steel", Journal of Nuclear Materials , vol. 474, pp 46–56, 2016. (DOI)
  51. D.W. Brown, M.A. Okuniewski, B. Clausen, G.A. Moore and T.A. Sisneros, "Neutron Diffraction Measurement of Residual Stresses in Al-clad U–10Mo Fuel Plates", Journal of Nuclear Materials , vol. 474, pp 8–18, 2016. (DOI)
  52. Z. Sun, G. Song, T.A. Sisneros, B. Clausen, C. Pu, L. Li, Y. Gao and P.K. Liaw, "Load Partitioning Between the bcc-Iron Matrix and NiAl-type Precipitates in a Ferritic Alloy on Multiple Length Scales", Sci. Rep., vol. 6, 23137, 2016. (DOI)
  53. J.A. Monroe, D. Gehring, I. Karaman, R. Arroyave, D.W. Brown and B. Clausen, "Tailored Thermal Expansion Alloys", Acta Mater., vol. 102, pp. 333-341, 2016. (DOI)
  54. M.-W. Zhu, N. Jia, F. Shi and B. Clausen, "Neutron Diffraction Study of Low-Cycle Fatigue Behavior in an Austenitic–Ferritic Stainless Steel", Acta Metall. Sinica, vol. 28(10), pp. 1247-1256, 2015. (DOI)
  55. H. Wang, B. Clausen, L. Capolungo, I.J. Beyerlein, J. Wang and C.N. Tomé, "Stress and Strain Relaxation in Magnesium AZ31 Rolled Plate: In-Situ Neutron Measurement and Elastic Viscoplastic Polycrystal Modeling", Int. J. Plast., vol. 79, pp. 275–292, 2016. (DOI)
  56. H. Wang, Y. Jeong, B. Clausen, Y. Liu, R.J. McCabe, F. Barlat and C.N. Tomé, "Effect of Martensitic Phase Transformation on the Behavior of 304 Austenitic Stainless Steel under Tension", Mat. Sci. Eng. A, vol. 649, pp. 174-183, 2016. (DOI)
  57. J. Čapek, J. Stráská, B. Clausen and K. Máthis, "Twinning Evolution as a Function of Loading Direction in Magnesium", Acta Physica Polonica A, vol.128(4), pp. 762-764, 2015. (DOI)
  58. K. Máthis, J. Gubicza, G. Csiszár, J. Čapek, B. Clausen, V. Šíma and P. Lukáš, "Effect of Loading Mode on the Evolution of the Dislocation Structure in Magnesium", Acta Physica Polonica A, vol. 128(4), pp. 700-703, 2015. (DOI)
  59. G. Song, Z. Sun, L. Li, X. Xu, M. Rawlings, C.H. Liebscher, B. Clausen, J. Poplawsky, D.N. Leonard, S. Huang, Z. Teng, C.T. Liu, M.D. Asta, Y. Gao, D.C. Dunand, G. Ghosh, M. Chen, M.E. Fine and P.K. Liaw, "Ferritic Alloys with Extreme Creep Resistance via Coherent Hierarchical Precipitates", Sci. Rep., vol. 5, 16327, 2015. (DOI)
  60. A.R. Pelton, B. Clausen and A.P. Stebner, "In-situ Neutron Diffraction Studies of Increasing Tension Strains of Superelastic Nitinol", Shap. Mem. Superelasticity, vol. 1(3), pp. 375-386, 2015. (DOI)
  61. M. Shamma, N.C. El'Ad, B. Anasori, B. Clausen, D.W. Brown, S.C. Vogel, V. Presser, S. Amini, O. Yeheskel and M.W. Barsoum, "In Situ Neutron Diffraction Evidence for Fully Reversible Dislocation Motion in Highly Textured Polycrystalline Ti2AlC Samples", Acta Mater., vol. 98, pp. 51-63, 2015. (DOI)
  62. M.D. Olson, M.R. Hill, B. Clausen, M. Steinzig and T.M. Holden, "Residual Stress Measurements in Dissimilar Weld Metal", Exp. Mech., vol. 55, pp. 1093-1103, 2015. (DOI)
  63. K. Máthis, G. Jeno, B. Clausen, S.R. Agnew, J. Čapek, G. Csiszar and Petr Lukas, "Effect of the Loading Mode on the Evolution of the Deformation Mechanisms in Randomly Textured Magnesium Polycrystals - Comparison of Experimental and Modeling Results", Int. J. Plast., vol. 72, pp. 127-150, 2015. (DOI)
  64. A.P. Stebner, H.M. Paranjape, B. Clausen, L.C. Brinson and A.R. Pelton, "In Situ Neutron Diffraction Studies of Large Monotonic Deformations of Superelastic Nitinol", Shap. Mem. Superelasticity, vol. 1(2), pp. 252-267, 2015. (DOI)
  65. K. Máthis, J. Čapek, B. Clausen, T. Krajňák and D. Nagarajan, "Investigation of the Dependence of Deformation Mechanisms on Solute Content in Polycrystalline Mg-Al Magnesium Alloys by Neutron Diffraction and Acoustic Emission", J. All. Comp., vol. 642, pp. 185-191, 2015. (DOI)
  66. O. Benafan, A. Garg, R.D. Noebe, G.S. Bigelow, S.A. Padula II, D.J. Gaydosh, R. Vaidyanathan, B. Clausen and S.C. Vogel, "Thermomechanical Behavior and Microstructural Evolution of a Ni-rich Ni24.3Ti49.7Pd26 High Temperature Shape Memory Alloy", J. Alloys Comp., vol. 643, pp. 275-289, 2015. (DOI)
  67. A.A. Saleh, D.W. Brown, E.V. Pereloma, B. Clausen, C.H.J. Davies, C.N. Tomé and A.A. Gazder, "An In-Situ Neutron Diffraction Study of a Multi-Phase Transformation and Twinning-Induced Plasticity Steel during Cyclic Loading", Appl. Phys. Lett., vol. 106, 171911, 2015. (DOI)
  68. A.M. Bolon, T.A. Sisneros, A.B. Schubert, B. Clausen, D.W. Brown and M.M. Gentleman, "Comparison of Neutron Diffraction and Raman Spectroscopic Studies of the Ferroelastic Behavior of Ceria-Stabilized Zirconia at Elevated Temperatures", J. Eur. Ceram. Soc., vol. 35(2), pp.623-629, 2015. (DOI)
  69. T. Ungár, T.M. Holden, B. Jóni, Bertalan, B. Clausen, L. Balogh, G. Csiszar and D.W. Brown, "Dislocation Structure in Different Texture Components Determined by Neutron Diffraction Line Profile Analysis in a Highly Textured Zircaloy-2 Rolled Plate", J. Appl. Cryst., vol. 48(2), pp. 409-417, 2015. (DOI)
  70. M. Könnecke, F.A. Akeroyd, H.J. Bernstein, A.S. Brewster, S.I. Campbell, B. Clausen, S. Cottrell, J.U. Hoffmann, P.R. Jemian, D. Männicke, R. Osborn, P.F. Peterson, T. Richter, J. Suzuki, B. Watts, E. Wintersberger and J. Wuttke, "The NeXus data format", J. Appl. Cryst., vol. 48(1), pp. 301-305, 2015. (DOI)
  71. M. Lentz, M. Klaus, R.S. Coelho, N. Schaefer, F. Schmack, W. Reimers and B. Clausen, "Analysis of the Deformation Behavior of Magnesium-Rare Earth Alloys Mg-2%Mn-1%Rare Earth and Mg-5%Y-4%Rare Earth by In-Situ Energy-Dispersive X-ray Synchrotron Diffraction and Elasto-Plastic Self-Consistent Modeling", Metall. Mater. Trans. A, vol. 45(12), pp. 5721-5735, 2014. (DOI)
  72. M. Dubois, D.W. Brown, B. Clausen, A. Addad and A. Lodini, "Study of Superelastic Behavior of CuAlBe Shape Memory Alloy by Neutron Diffraction", Solid State Phen., vol. 216, pp. 194-199, 2014. (DOI)
  73. P.J. Gibbs, B.C. De Cooman, D.W. Brown, B. Clausen, J.G. Schroth, M.J. Merwin and D.K. Matlock, "Strain Partitioning in Ultra-Fine Grained Medium-Manganese Transformation Induced Plasticity Steel”, Mat. Sci. Eng. A, vol. 609, pp. 323-333, 2014. (DOI)
  74. S.H. Williams, D.W. Brown, B. Clausen, A. Russell and K.A. Gschneidner, Jr., "Observations of a dynamical-to-kinematic diffraction transition in plastically deformed polycrystalline intermetallic YCu”, Acta Mater., vol. 70(15), pp. 307-315, 2014. (DOI)
  75. J. Čapek, K. Máthis, B. Clausen, J. Stráská, P. Beran and Petr Lukáš, "Study of the Loading Mode Dependence of the Twinning in Random Textured Cast Magnesium by Acoustic Emission and Neutron Diffraction Methods", Mat. Sci. Eng. A, vol. 602, pp. 25-32, 2014. (DOI)
  76. D.W. Brown, J.D. Almer, L. Balogh, E.K. Cerreta, B. Clausen, J.P. Escobedo-Diaz, T.A. Sisneros, P.L. Mosbrucker, E.F. Tulk and S.C. Vogel, "Stability of the two-phase (α/ω) microstructure of shocked zirconium”, Acta Mater., vol. 67, pp. 383-394, 2014. (DOI)
  77. M. Glavicic, D.W. Brown, B. Clausen, T. Sisneros and T.M. Holden, "Load-Sharing in δ-Processed Inconel 718", Mat. Sci. Forum, vol. 777, pp. 52-57, 2014. (DOI)
  78. M.B. Prime, A.T. DeWald, M.R. Hill, B. Clausen and M. Tran, "Forensic Determination of Residual Stresses and KI From Fracture Surface Mismatch", Eng. Frac. Mech., vol. 116, pp. 158-171, 2014. (DOI)
  79. O. Benafan, R.D. Noebe, S.A. Padula II, A. Garg, B. Clausen, S. Vogel and R. Vaidyanathan, "Temperature Dependent Deformation of the B2 Austenite Phase of a NiTi Shape Memory Alloy", Int. J. Plast., vol. 51, pp. 103-121, 2013. (DOI)
  80. S.R. Agnew, C.A. Calhoun and B. Clausen, "In situ Neutron Diffraction Study of Aging in Alloy ZK60A", Magnesium Technology, pp. 389-393, 2014. (DOI)
  81. C. Sun, D.W. Brown, B. Clausen, D.C. Foley, K.Y. Yu, Y. Chen, S. Maloy, K.T. Hartwig, H. Wang and X. Zhang, "In Situ Neutron Diffraction Study on Temperature Dependent Deformation Mechanisms of Ultrafine Grained Austenitic Fe-14Cr-16Ni Alloy", Int. J. Plasticity, vol. 53, pp. 125-134, 2014. (DOI)
  82. A.A. Saleh, E.V. Pereloma, B. Clausen, D.W. Brown, C.N. Tomé and A.A. Gazder, "Self-consistent modelling of lattice strains during the in-situ tensile loading of twinning induced plasticity steel", Mat. Sci. Eng. A, vol. 589, pp. 66-75, 2014. (DOI)
  83. M. Kerr, M.B. Prime, H. Swenson, M.A. Buechler, M. Steinzig, B. Clausen and T. Sisneros , "Residual Stress Characterization in a Dissimilar Metal Weld Nuclear Reactor Piping System Mock Up", J. Pressure Vessel Technol., vol. 135(4), 041205, 2013. (DOI)
  84. E.K. Cerreta, J.P. Escobedo, P.A. Rigg, C.P. Trujillo, D.W. Brown, T.A. Sisneros, B. Clausen, M.F. Lopez, T. Lookman, C.A. Bronkhorst and F.L. Addessio, "The Influence of Phase and Substructural Evolution During Dynamic Loading on Subsequent Mechanical Properties of Zirconium", Acta Mater., vol. 60(20), pp. 7712-7719, 2013. (DOI)
  85. D.W. Brown, B. Clausen, T.A. Sisneros, L. Balogh and I.J. Beyerlein, "In-Situ Neutron Diffraction Measurements During Annealing of Deformed Beryllium With Differing Initial Textures", Metall. Mater. Trans. A, vol. 44(13), pp. 5665-5675, 2013. (DOI)
  86. D.W. Brown, D.J. Alexander, K.D. Clarke, B. Clausen, M.A. Okuniewski and T.A. Sisneros, "Elastic Properties of Rolled Uranium–10 wt.% Molybdenum Nuclear Fuel Foils", Scripta Mater., vol. 69(9), pp. 666-669, 2013. (DOI)
  87. A.P. Stebner, S.C. Vogel, R.D. Noebe, T.A. Sisneros, B. Clausen, D.W. Brown, A. Garg and L.C. Brinson, "Micromechanical Quantification of Elastic, Twinning, and Slip Strain Partitioning Exhibited by Polycrystalline, Monoclinic Nickel–Titanium during Large Uniaxial Deformations Measured via In-Situ Neutron Diffraction", J. Mech. Phys. Solids, vol. 61(11), pp. 2302-2330, 2013. (DOI)
  88. M. Lentz, M. Klaus, W. Reimers and B. Clausen, "Effect of High Temperature Heat Treatments on the Deformation Behavior of Mg–2%Mn–0.7%Ce Extrusions Investigated by In-Situ Energy-Dispersive Synchrotron X-ray Diffraction and Elasto-Plastic Self-Consistent Modeling", Mat. Sci. Eng. A, vol. 586, pp. 178–189, 2013. (DOI)
  89. S.S. Babu, S. Vogel, C. Garcia-Mateoe, B. Clausen, L. Morales-Rivas and F.G. Caballero, "Microstructure evolution during tensile deformation of a nanostructured bainitic steel", Scripta Mater., vol. 69(11–12), pp. 777–780, 2013. (DOI)
  90. A.A. Saleh, E.V. Pereloma, B. Clausen, D.W. Brown, C.N. Tomé and A.A. Gazder, "On the Evolution and Modelling of Lattice Strains during the Cyclic Loading of TWIP Steel", Acta Mater., vol. 61914), pp. 5247-5262, 2013. (DOI)
  91. K. Máthis J. Čapek P. Lukáš, D.W. Brown and B. Clausen, "Investigation of Twinning Activity in Magnesium Using Advanced In-Situ Methods", Mater. Sci. Forum, vol 765, pp 532-536, 2013. (DOI)
  92. D.W. Brown, M.A. Okuniewski, J.D. Almer, L. Balogh, B. Clausen, J.S. Okasinski, B.H. Rabin, "High Energy X-ray Diffraction Measurement of Residual Stresses in a Monolithic Aluminum Clad Uranium–10 wt% Molybdenum Fuel Plate Assembly", J. Nucl. Mater., vol. 441(1-3), pp. 252-261, 2013. (DOI)
  93. T. Skippon, B. Clausen and M.R. Daymond, "Effect of Loading Mode on Lattice Strain Measurements via Neutron Diffraction", Mat. Sci. Eng. A, vol. 577, pp. 169-178, 2013. (DOI)
  94. S.R. Agnew, R.P. Mulay, F.J. Polesak, III, C.A. Calhoun, J. Bhattacharrya, and B. Clausen, "In situ Neutron Diffraction and Polycrystal Plasticity Modeling of a Mg-Y-Nd-Zr Alloy: Effects of Precipitation on Individual Deformation Mechanisms", Acta Mater., vol. 61(10), pp. 3769-3780, 2013. (DOI)
  95. L. Balogh, S.R. Niezgoda, A.K. Kanjarl, D.W. Brown, B. Clausen, W. Liu and C.N. Tomé, "Spatially Resolved in situ Strain Measurements from an Interior Twinned Grain in Bulk Polycrystalline AZ31 Alloy", Acta Mater., vol. 61(10), pp. 3612-3620, 2013. (DOI)
  96. O. Benafan, S.A. Padula II, R.D. Noebe, D.W. Brown, B. Clausen and R. Vaidyanathan, "An In Situ Neutron Diffraction Study of Shape Setting Shape Memory NiTi", Acta Mater., vol. 61(10), pp. 3585-3599, 2013. (DOI)
  97. R. Woracek, J.R. Bunn, D. Penumadu, A. Tremsin, A. Siriruk, N. Kardjilov, I. Manke, M. Boin, A. Hilger, C.R. Hubbard, B. Clausen and T.A. Sisneros, "Methodology for Combined Neutron Diffraction and Bragg Edge Imaging", MRS Proceedings, vol. 1528, 2013. (DOI)
  98. A.T. DeWald, D. Legzdina, B. Clausen, D.W. Brown, T.A. Sisneros and M.R. Hil, "A Comparison of Residual Stress Measurements on a Linear Friction Weld Using the Contour Method and Neutron Diffraction", Experimental and Applied Mechanics, vol. 4, pp. 183-189, 2013. (DOI)
  99. H. Wang, B. Clausen, C.N. Tomé and P.D. Wu, "Studying the Effect of Stress Relaxation and Creep on Lattice Strain Evolution of Stainless Steel under Tension", Acta Mater., vol. 61(4), pp. 1179-1188, 2013. (DOI)
  100. G. Bruno, B.R. Wheaton, B. Clausen and T. Sisneros "Microstress Partitioning in Porous and Microcracked Synthetic Cordierite", Scripta Mater., vol. 68(2), pp. 100.103, 2013. (DOI)
  101. F. Mei, I.C. Noyan, A. Brügger, R. Betti, B. Clausen, D.W. Brown and T. Sisneros, "Neutron Diffraction Measurement of Stress Redistribution in Parallel Seven-Wire Strands after Local Fracture", Experimental Mechanics, vol. 53(2), pp. 183-193, 2013. (DOI)
  102. D.W. Brown, J.D. Almer, B. Clausen, P.L. Mosbrucker, T.A. Sisneros and S.C. Vogel, "Twinning and de-twinning in beryllium during strain path changes" Mat. Sci. Eng. A, vol. 559(1), pp. 29,39, 2013. (DOI)
  103. S.R. Agnew, F.J. Polesak and B. Clausen, "In-Situ Neutron Diffraction Study of Aging of a Mg-Y-Nd-Zr Alloy (WE43): Effects of Precipitation on Individual Deformation Mechanisms", Proceedings of the 2012 Int. Conf. on Magnesium Alloys, vol. 61(10), pp. 3769-3780, 2013. (pdf)
  104. W. Woo, Z. Feng, X.-L. Wang, K. An, B. Clausen, T.A. Sisneros and J.S. Jeong, "In Situ Neutron Diffraction Analysis of Grain Structure during Friction Stir Processing of an Aluminum Alloy", Materials Letters, vol. 85, pp. 29-32, 2012. (DOI)
  105. Z.K. Teng, G. Ghosh, M.K. Miller, S. Huang, B. Clausen, D.W. Brown and P.K. Liaw, "Neutron-Diffraction Study and Modeling of the Lattice Parameters of a NiAl-Precipitate-Strengthened Fe-based Alloy", Acta Mater., vol. 60(13), pp. 5362-5369, 2012. (DOI)
  106. B. Clausen, D.W. Brown, M.A.M. Bourke, T.A. Saleh and S.A. Maloy, "In Situ Neutron Diffraction and Elastic-Plastic Self-Consistent Polycrystal Modeling of HT-9", J. Nucl. Mater., vol. 45(1-3), pp. 228-232, 2012. (DOI)
  107. E.-W. Huang, R. Barabash, B. Clausen and P.K. Liaw, "Cyclic-loading Induced Lattice-Strain Asymmetry in Loading and Transverse Directions", Metall. Mater. Trans. A, vol. 43(5), pp. 1454-1461, 2012. (DOI)
  108. S. Huang, D.W. Brown, B. Clausen Z. Teng, Y. Gao and P.K. Liaw, "In Situ Neutron-Diffraction Studies on the Creep Behavior of a Ferritic Superalloy", Metall. Mater. Trans. A, vol. 43(5), pp. 1497-1508, 2012. (DOI)
  109. J.A. Wollmershauser, B. Clausen and S.R. Agnew, "A Slip System-Based Kinematic Hardening Model Application to In Situ Neutron Diffraction of Cyclic Deformation of Austenitic Stainless Steel", Int. J. Fatigue, vol. 36(1), pp. 181-193, 2012. (DOI)
  110. D. Ma, A.D. Stoica, X.-L. Wang, Z.P. Lu, B. Clausen and D.W. Brown, "Elastic Moduli Inheritance and the Weakest Link in Bulk Metallic Glasses" Phys. Rev. Lett., vol. 108, 085501, 2012. (DOI)
  111. C.N. Tupper, D.W. Brown, R.D. Field, T.A. Sisneros and B. Clausen, "Large Strain Deformation in Uranium 6 Wt Pct Niobium" Metall. Trans. A, vol. 43(2), pp. 520-530, 2012. (DOI)
  112. D.W. Brown, I.J. Beyerlein, T.A. Sisneros, B. Clausen and C.N. Tomé, "Role of Twinning and Slip During Compressive Deformation of Beryllium as a Function of Strain Rate", Int. J. Plast., vol. 29(1), pp. 120-135, 2012. (DOI)
  113. B. Clausen, D.W. Brown and I.C. Noyan, "Engineering Applications of Time-of-Flight Neutron Diffraction" JOM, vol. 64(1), pp. 117,126, 2012. (DOI)
  114. P. Gibbs, E. De Moor, M.J. Merwin, B. Clausen, J.G. Speer and D.K. Matlock, "Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel", Metall. Mater. Trans. A, vol. 42(12), pp. 3691-3702, 2011. (DOI) This paper was awarded an American Iron and Steel Institute 2013 Finalist Medal
  115. B. Clausen, D.W. Brown, C.N. Tomé , C.J. Neil, J.A. Wollmershauser and S.R. Agnew, "Application of a Finite Strain Elastic-Plastic Self-Consistent Model to Deformation of Magnesium", SEM Proceedings, vol. 8, pp. 33-34, 2011. (DOI)
  116. M. Shamma, V. Presser, B. Clausen, D.W. Brown, O. Yeheskel, S. Amini and M.W. Barsoum, "On the Response of Titanium Sulfocarbide to Stress Studied by In Situ Neutron Diffraction and the Elastoplastic Self-Consistent Approach", Scripta Mater., vol. 65(7), pp. 573-576, 2011. (DOI)
  117. P. Pagliaro, M. B. Prime, J.S. Robinson, B. Clausen, H. Swenson, M. Steinzig and B. Zuccarello, "Measuring Inaccessible Residual Stresses Using Multiple Methods and Superposition", Experimental Mechanics, vol. 51(7), pp. 1123-1134, 2011. (DOI)
  118. J. Watts, G. Hilmas, W.G. Fahrenholtz, D.W. Brown and B. Clausen, "Measurement of thermal residual stresses in ZrB2-SiC composites", J. Eur. Ceram. Soc., vol. 31(9), pp. 1811-1820, 2011. (DOI)
  119. D.W. Brown, T.M. Holden, B. Clausen, M.B. Prime, T.A. Sisneros, H. Swenson and J. Vaja, "Critical Comparison of two Independent Measurements of Residual Stress in an Electron-Beam Welded Uranium Cylinder: Neutron Diffraction and the Contour Method", Acta Mater., vol. 59(3), pp. 864-873, 2011. (DOI)
  120. R.P. Mulay, B. Clausen and S.R. Agnew, "In-Situ Neutron Diffraction Study of the Bauschinger Effect in B2 Structured CoZr", Metall. Trans. A, vol. 42(1), pp. 60-70, 2011. (DOI)
  121. G. Bruno, A.M. Efremov, A.N. Levandovskyi and B. Clausen, "Connecting the Macro- and Microstrain Responses in Technical Porous Ceramics: Modeling and Experimental Validations", J. Mater. Sci., vol. 46(1), pp. 161-173, 2011. (DOI) This paper was awarded the 2nd Prize at the 2011 Journal of Materials Science Sapphire Prize
  122. S. Qiu, B. Clausen, S.A. Padula II, R.D. Noebe and R. Vaidyanathan, "On Elastic Moduli and Elastic Anisotropy in Polycrystalline Martensitic NiTi", Acta Mater., vol. 59(13), pp. 5055-5066, 2011. (DOI)
  123. B. Clausen, D.W. Brown, C.N. Tomé, Levente Balogh and S.C. Vogel, "Engineering Related Neutron Diffraction Measurements Probing Strains, Texture and Microstructure", Proceedings of the 31th Risø International Symposium on Materials Science, Roskilde, Denmark, September 6-10, page 11, 2010. (pdf, pre-print)
  124. C.J. Neil, J.A. Wollmershauser, B. Clausen, C.N. Tomé and S.R. Agnew, "Modeling Lattice Strain Evolution at Finite Strains and Experimental Verification for Copper and Stainless Steel using In Situ Neutron Diffraction", Int. J. Plasticity, vol. 26(12), pp. 1772-1791, 2010. (DOI)
  125. E. Garlea, H. Choo, G.Y. Wamg, P.K. Liaw, B. Clausen, D.W. Brown, J. Park, P.D. Rack and E.A. Kenik, "Hydride-Phase Formation and its Influence on Fatigue Crack Propagation Behavior in a Zircaloy-4 Alloy", Metall. Trans. A, vol. 41(11), pp. 2816-2828, 2010. (DOI)
  126. L. Wu, S.R. Agnew, Y. Ren, D.W. Brown, B. Clausen, G.M. Stoica, H.R. Wenk and P.K. Liaw, "The Effects of Texture and Extension Twinning on the Low-Cycle Fatigue Behavior of a Rolled Magnesium Alloy, AZ31B", Mat. Sci. Eng. A, vol. 527(26), pp. 7057-7067 , 2010. (DOI)
  127. E-W. Huang, R.I. Barabash, B. Clausen, Y.-L. Liu, J.-J. Kaid, G.E. Ice, K.P. Woods and P.K. Liaw, "Fatigue-Induced Reversible/Irreversible Structural-Transformations in a Ni-Based Superalloy", Int. J. Plasticity, vol. 26(8), pp. 1124-1137, 2010. (DOI)
  128. J. Watts, G. Hilmas, W.G. Fahrenholtz, D.W. Brown and B. Clausen, "Stress Measurements in ZrB2-SiC Composites using Raman Spectroscopy and Neutron Diffraction", J. European Ceramic Soc., vol. 30(11), pp. 2165-2171, 2010. (DOI)
  129. T.A. Sisneros, D.W. Brown, B. Clausen, D.C. Donati, S. Kabra, W.R. Blumenthal and S.C. Vogel, "Influence of Strain Rate on Mechanical Properties and Deformation Texture of Hot-Pressed and Rolled Beryllium", Mat. Sci. Eng. A, vol. 527(20), pp. 5181-5188, 2010. (DOI)
  130. A.D. Krawitz, E.F. Drake and B. Clausen, "The Role of Residual Stress in the Tension and Compression Response of WC-Ni", Mat. Sci. & Eng. A, vol. 527(15), pp. 3595-3601, 2010. (DOI)
  131. K. An, B. Clausen , A.D. Stoica, B.L. Armstrong, H.D. Skorpenske and X.-L. Wang, "In-situ Neutron Diffraction Study of Phase Stress Evolutions in a Ni-based Porous Anode Solid Oxide Fuel Cells Under Uniaxial Load", Appl. Phys. A, vol. 99(3), pp. 579-584, 2010. (DOI)
  132. T.R. Woodruff, V.B. Krishnan, B. Clausen, T. Sisneros, V. Livescu, D.W. Brown, M.A.M. Bourke and R. Vaidyanathan, "Design, Implementation, and Testing of a Cryogenic Loading Capability on an Engineering Neutron Diffractometer", Rev. Sci. Instrum., vol. 81(6), 063903, 2010. (DOI)
  133. W. Woo, T. Ungár, Z. Feng, E. Kenik and B. Clausen, "X-Ray and Neutron Diffraction Measurements of Dislocation Density and Subgrain Size in a Friction-Stir-Welded Aluminum Alloy", Metall. Trans. A, vol. 41(5), pp. 1210-1216, 2010. (DOI)
  134. E. Garlea, B. Clausen, E.A. Kenik, D. Ciurchea, S.C. Vogel, J.W.L. Pang and H. Choo, "Intergranular Strain Evolution in a Zircaloy-4 Alloy with Basketweave Morphology", Metall. Trans. A, vol. 41(5), pp. 1255-1260, 2010. (DOI)
  135. S. Pojprapai(Imlao), Z. Luo, B. Clausen, S.C. Vogel, D.W. Brown and M. Hoffman, "Dynamic Processes of Domain Switching in Lead Zirconate Titanate under Cyclic Mechanical Loading by In Situ Neutron Diffraction", Acta Mater, vol. 58(6), pp. 1897-1908, 2010. (DOI)
  136. G. Bruno, A.M. Efremov, B. Clausen, A.M. Balagurov, V.N. Simkin, B.R. Wheaton, J.E. Webb and D.W. Brown, "On the Stress-Free Lattice Expansion of Porous Cordierite", Acta Mater, vol. 58(6), pp. 1994-2003, 2010. (DOI)
  137. I.C. Noyan, A. Brügger, R. Betti and B. Clausen, "Measurement of Strain/Load Transfer in Parallel Seven-wire Strands with Neutron Diffraction", Experimental Mechanics, vol. 50(2), pp. 265-272, 2010. (DOI)
  138. G. Proust, G.C. Kaschner, I.J. Beyerlein, B. Clausen, D.W. Brown, R.J. McCabe and C.N. Tomé, "Detwinning of High-Purity Zirconium: In-Situ Neutron Diffraction Experiments", Experimental Mechanics, vol. 50, pp. 125-133, 2010. (DOI)
  139. T.M. Holden, D.W. Brown, B. Clausen and H. Suzuki, "Search for Evidence of Stacking Faults in Austenitic Stainless Steel Alloys by Neutron Diffraction", Mat. Sci. Forum, vol. 652, pp. 129-132, 2010. (DOI)
  140. G. Bruno, A.M. Efremov, A.N. Levandovskiy, I. Pozdnyakova, D.J. Hughes and B. Clausen, "Thermal and Mechanical Response of Industrial Porous Ceramics", Mat. Sci. Forum, vol. 652, pp. 191-196, 2010. (DOI)
  141. I. Pozdnyakova, G. Bruno, A.M. Efremov, B. Clausen and D. Hughes, "Stress-Dependent Elastic Properties of Porous Microcracked Ceramics", Adv. Eng. Mater., vol. 11(12), pp. 1023-1029, 2009. (DOI)
  142. S. Qiu, V.B. Krishnan, S.A. Padula II, R.D. Noebe, D.W. Brown, B. Clausen, and R. Vaidyanathan, "Measurement of the Lattice Plane Strain and Phase Fraction Evolution during Heating and Cooling in Shape Memory NiTi", Appl. Phys. Lett., vol. 95(14), p. 141906, 2009. (DOI)
  143. S. Cheng, A. D. Stoica, X.-L. Wang, Y. Ren, J. Almer, J. A. Horton, C. T. Liu, B. Clausen, D.W. Brown, P. K. Liaw, and L. Zuo, "Deformation Crossover: From Nano- to Mesoscale", Phys. Rev. Lett., vol. 103, p. 035502, 2009. (DOI)
  144. P. Pagliaro, M.B. Prime, B. Clausen, M.L. Lovato and B. Zuccarello, "Known Residual Stress Specimens Using Opposed Indentation", Journal of Engineering Materials and Technology, vol. 131, 031002, 2009. (DOI)
  145. C.C. Aydiner, J.V. Bernier, B. Clausen, U. Lienert, C.N. Tomé and D.W. Brown, "Evolution of Stress in Individual Grains and Twins in a Magnesium Alloy Aggregate", Phys. Rev. B, vol. 80(2), p. 024113, 2009. (DOI)
  146. D.W. Brown, M.A.M. Bourke, B. Clausen, D.R. Korzekwa, R.C. Korzekwa, R.J. McCabe, T.A. Sisneros and D.F. Teter, "Temperature and Direction Dependence of Internal Strain and Texture Evolution During Deformation of Uranium", Mat. Sci. & Eng. A, vol. 512(1-2), pp. 67-75, 2009. (DOI)
  147. G.J. Fan, L. Li, B. Yang, H. Choo, P.K. Liaw, T.A. Saleh, B. Clausen and D.W. Brown, "In Situ Neutron-Diffraction Study of Tensile Deformation of a Bulk Nanocrystalline Alloy", Mat. Sci. & Eng. A, vol. 512(1-2), pp. 187-190, 2009. (DOI)
  148. D. Mari, B. Clausen, M.A.M. Bourke and K. Buss, "Measurement of Residual Thermal Stress in WC-Co by Neutron Diffraction", Int. J. Refractory Metals Hard Mater, vol. 27(2), pp. 282-287, 2009. (DOI)
  149. A.D. Krawitz, A.M. Venter, E.F. Drake, S.B. Luyckx and B. Clausen, "Phase Response of WC-Ni to Cyclic Compressive Loading and its Relation to Toughness", Int. J. Refractory Metals Hard Mater, vol. 27(2), pp. 313-316, 2009. (DOI)
  150. D.W. Brown, T.A. Sisneros, B. Clausen, S. Abeln, M.A.M. Bourke, B.G. Smith, M.L. Steinzig, C.N. Tomé and S.C. Vogel, "Development of Intergranular Thermal Residual Stresses in Beryllium During Cooling from Processing Temperatures", Acta Mater., vol. 57(4), pp. 972-979, 2009. (DOI)
  151. B. Clausen, M.B. Prime, S. Kabra, D.W. Brown and P. Pagliaro, "Residual Stress and Plastic Anisotropy in Indented 2024-T351 Aluminum Disks", Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics, vol. 3, pp. 1639-1646, 2009. (link)
  152. W. Woo, Z. Feng, X.-L. Wang, H. Choo, S.A. David, D.W. Brown and B. Clausen, "In-situ Time-resolved Neutron Diffraction Measurements of Thermal Stresses During Severe Thermo-Mechanical Deformation", Proceedings of the KNS Spring Meeting, 2009.
  153. E-W. Huang, R. Barabash, N. Jia, Y.-D. Wang, G.E. Ice, B. Clausen, J. Horton and P.K. Liaw, "Slip-System-Related Dislocation Study from In-Situ Neutron Measurements", Metall. Trans. A, vol. 39(13), pp. 3079-3088, 2008. (DOI)
  154. S. Cheng, X.-L. Wang, Z. Feng, B. Clausen, H. Choo, and P.K. Liaw, "Probing the Characteristic Deformation Behaviors of Transformation-Induced Plasticity Steels", Metall. Trans. A, vol. 39(13), pp. 3105-3112, 2008. (DOI)
  155. N. Jia, R.L. Peng, D.W. Brown, B. Clausen and Y.D. Wang, "Tensile Deformation Behavior of Duplex Stainless Steel Studied by In-Situ Time-of-Flight Neutron Diffraction", Metall. Trans. A, vol. 39(13), pp. 3134-3140, 2008. (DOI)
  156. L. Wu, S.R. Agnew, D.W. Brown, G.M. Stoica, B. Clausen, A. Jain, D.E. Fielden and P.K. Liaw, "Internal Stress Relaxation and Load Redistribution During the Twinning-Detwinning-dominated cyclic deformation of a wrought magnesium alloy, ZK60A", Acta Mater., vol. 56(4), pp. 3699-3707, 2008. (DOI)
  157. T. Wilson, B. Clausen, T. Proffen, J. Elle and D.W. Brown, "In-situ Neutron Scattering Measurement of Stress-Strain Behavior of a Bulk Metallic Glass", Metall. Trans. A, vol. 39(8), pp. 1942-1946, 2008. (DOI)
  158. B. Clausen, C.N. Tomé, D.W. Brown and S.R. Agnew, "Reorientation and Stress Relaxation due to Twinning: Modeling and Experimental Characterization for Mg", Acta Mater., vol. 56(11), pp. 2456-2468, 2008. (DOI)
  159. V.B. Krishnan, R.M. Manjeri, B. Clausen, D.W. Brown and R. Vaidyanathan, "Analysis of Neutron Diffraction Spectra Acquired in-situ During Mechanical Loading of Shape Memory NiTiFe at Low Temperatures", Mat. Sci. & Eng. A, vol. 481-482, pp. 3-10, 2008. (DOI)
  160. W. Woo, H. Choo, M.B. Prime, Z. Feng and B. Clausen, "Microstructure, Texture and Residual Stress in a Friction-Stir-Processed AZ31B Magnesium Alloy", Acta Mater., vol. 56(8), pp. 1701-1711, 2008. (DOI)
  161. L. Wu, A. Jain, D.W. Brown, G.M. Stoica, S.R. Agnew, B. Clausen, D.E. Fielden and P.K. Liaw, "Twinning-Detwinning Behavior During the Strain-Controlled Low-Cycle Fatigue Testing of a Wrought Magnesium Alloy, ZK60A", Acta Mater., vol. 56(4), pp. 688-695, 2008. (DOI)
  162. E.N. Brown, P.J. Rae, D.M. Dattelbaum, B. Clausen and D.W. Brown, "In-situ Measurement of Crystalline Lattice Strains in Polytetrafluoroethylene", Experimental Mechanics, vol. 48, pp. 119-131, 2008. (DOI)
  163. E.-W. Huang, R.I. Barabash, Y. Wang, B. Clausen, L. Li, P.K. Liaw, G.E. Ice, Y. Ren, H. Choo, L.M. Pike and D.M. Klarstrom, "Plastic Behavior of a Nickel-Based Alloy under Monotonic-Tension and Low-Cycle-Fatigue Loading", Int. J. Plasticity, vol. 24(8), pp. 1440-1456, 2008. (DOI)
  164. D.R. Kammler, M.A. Rodriguez, R.G. Tissot, D.W. Brown, B. Clausen and T.A. Sisneros, "In-Situ Time-of-Flight Neutron Diffraction Study of High-Temperature α-to-β Phase Transition in Elemental Scandium", Metall. Trans. A, vol. 39(12), pp. 2815-2819, 2008. (DOI)
  165. E.-W. Huang, B. Clausen, Y. Wang, H. Choo, P.K. Liaw, M.L. Benson, L.M. Pike and D.L. Klarstrom, "A Neutron-Diffraction Study of the Low-Cycle Fatigue Behavior of HASTELLOY C-22HSTM Alloy", Int. J. Fatigue, vol. 29, pp. 1812-1819, 2007. (DOI)
  166. J.W. Paggett, A.D. Krawitz, E.F. Drake, M.A.M. Bourke, B. Clausen and D.W. Brown, "In-Situ Response of WC-Ni Composites Under Compressive Load", Metall. Trans. A, vol. 38(7), pp. 1638-1648, 2007. (DOI)
  167. P. Pagliaro, M.B. Prime, B. Zuccarello, B. Clausen and T.R. Watkins, "Validation Specimen for Contour Method Extension to Multiple Residual Stress Components", Proceedings of the 13th International Conference on Experimental Mechanics, Experimental Analysis of Nano and Engineering Materials and Structures, Alexandroupolis, Greece, July 1-6, paper no. 246, 2007. (pdf, pre-print)
  168. W. Woo, Z. Feng, X.-L. Wang, D. W. Brown, B. Clausen, K. An, H. Choo, C. R. Hubbard and S. A. David, "In Situ Neutron Diffraction Measurements of Temperature and Stresses During Friction Stir Welding of 6061-T6 Aluminium Alloy", Science and Technology of Welding and Joining, vol. 12(4), pp. 298-303, 2007 (DOI)
  169. M.R. Daymond, M. Preuss and B. Clausen, "Evidence of Variation in Slip Mode in a Polycrystalline Nickel-Base Superalloy with Change in Temperature from Neutron Diffraction Strain Measurements", Acta Materialia, vol. 55(9), pp. 3089-3102, 2007 (DOI)
  170. E.N. Brown, D.M. Dattelbaum, D.W. Brown, P.J. Rae and B. Clausen, "A New Strain Path to Inducing Phase Transitions in Semi-Crystalline Polymers", Polymer, vol. 48, pp. 2531-2536, 2007 (DOI)
  171. W. Woo, Z. Feng, X.-L. Wang, D.W. Brown, B. Clausen, C.R. Hubbard, H. Choo and S.A. David, "Quasi-Steady State Principle and In-Situ Real-Time Investigation of Transient Strains in 6061-T6 Al Alloy using Neutron Diffraction", Key Engineering Materials, vol. 345-346, pp. 797-800, 2007 (DOI)
  172. E.-W. Huang, Y. Wang, B. Clausen, M.L. Benson, H. Choo, P.K. Liaw and L.M. Pike, "A Nondestructive hkl-Planes Analysis of a Nano-Precipitate-Strengthening Aloy Study", Key Engineering Materials, vol. 345-346, pp. 1311-1314, 2007 (DOI)
  173. K. Tao, H. Choo, H. Li, B. Clausen, J.-E. Jin and Y.-K. Lee, "Transformation-Induced Plasticity in an Ultrafine-Grained Steel: An In Situ Neutron Diffraction Study", Appl. Phys. Lett., vol. 90(10), 101911, 2007 (DOI)
  174. Y. Zhao, J. Zhang, B. Clausen, T.D. Shen, G.T. Gray and L. Wang, "Thermomechanics of Nanocrystalline Nickel under High Pressure-Temperature Conditions", Nano Lett., vol. 7(2), pp. 426-432, 2007. (DOI)
  175. W. Woo, H. Choo, D.W. Brown, B. Clausen, Z. Feng, and P.K. Liaw, "Residual Strain Measurements in a Friction-Stir Processed AZ31B Magnesium Alloy Using Neutron Diffraction", Materials Science Forum, vol. 539-543, pp. 3795-3800, 2007. (DOI)
  176. D.W. Brown, A. Jain, S.R. Agnew and B. Clausen, "Twinning and Detwinning During Cyclic Deformation of Mg Alloy AZ31B", Materials Science Forum, vol. 539-543, pp. 3407-3413, 2007. (DOI)
  177. E.N. Brown, B. Clausen and D.W. Brown, "In Situ Measurement of Crystalline Lattice Strains in Phase IV Polytetrafluoroethylene", J. Neutron Research, vol. 15(2), pp. 139-146, 2007 (DOI)
  178. T.M. Holden, B. Clausen and D.G. Carr, "Comparison Between Single Peak and Rietveld Analysis of a Zircaloy-4 Weldment", J. Neutron Research, vol. 15(2), pp. 155-164, 2007. (DOI)
  179. T.M. Holden, H. Suzuki, D.G. Carr, M.I. Ripley and B. Clausen, "Stress Measurements in Welds: Problem Areas", Mat. Sci. & Eng. A, vol. 437, pp. 33-37, 2006. (DOI)
  180. J.W. Paggett, A.D. Krawitz, E.F. Drake, M.A.M. Bourke, V. Livescu, B. Clausen and D.W. Brown, "In Situ Loading Response of WC-Ni: Origins of Toughness", Int. J. Refractory Metals Hard Mater, vol. 24, pp. 122-128, 2006 (DOI)
  181. C.R. Rathod, B. Clausen, M.A.M. Bourke and R. Vaidyanathan, "Neutron Diffraction Investigation of Hysteresis Reduction and Increase in Linearity in the Stress-Strain Response of Superelastic NiTi", Appl. Phys. Lett. vol. 88(20), 201919, 2006 (DOI)
  182. B. Clausen, M.A.M Bourke, D.W. Brown and E. Üstündag, "Load Sharing in Tungsten Fiber Reinforced Kanthal Composites", Mat. Sci. & Eng. A, vol. 421(1-2), pp. 9-14, 2006. (DOI)
  183. B. Clausen, S.-Y. Lee, E. Üstündag, C.P. Kim, D.W. Brown and M.A.M. Bourke, "Compressive Deformation of In Situ Formed Bulk Metallic Glass Composites", Scripta Materialia, vol. 54, pp. 343-347, 2006. (DOI)
  184. K. Tao, H. Choo, H. Li, B. Clausen, D.W. Brown, J.E. Jin, and Y.K. Lee, "In Situ Neutron Diffraction Study on the Mechanical Behavior of an Ultra-Fine-Grained Steel", Materials Science Forum, vol. 426-432, pp. 639-644, 2006. (DOI)
  185. V. Livescu, B. Clausen, J.W. Paggett, A.D. Krawitz, E.F. Drake and M.A.M. Bourke, "Measurement and Modeling of Room Temperature Co-Deformation in WC-10 wt.%% Co", Mat. Sci. & Eng. A, vol. 399(1-2), pp. 134-140, 2005. (DOI)
  186. S.-Y. Lee, B. Clausen, E. Üstündag, H. Choi-Yim, C.C. Aydiner and M.A.M. Bourke, "Compressive Behavior of Wire Reinforced Bulk Metallic Glass Matrix Composites", Mat. Sci. & Eng. A, vol. 399(1-2), pp. 128-133, 2005. (DOI)
  187. C.C. Aydiner, E. Üstündag, B. Clausen, J.C. Hanan, R.A. Winholtz, M.A.M. Bourke and A. Peker, "Residual Stresses in a Bulk Metallic Glass-Stainless Steel Composite", Mat. Sci. & Eng. A, vol. 399(1-2), pp. 107-113, 2005. (DOI)
  188. J.C. Hanan, S. Mahesh, E. Üstündag, I.J. Beyerlein, G.A. Swift, B. Clausen, D.W. Brown and M.A.M. Bourke, "Strain Evolution After Fiber Failure in a Single-Fiber Metal Matrix Composite Under Cyclic Loading", Mat. Sci. & Eng. A, vol. 399(1-2), pp. 33-42, 2005. (DOI)
  189. S. Ma, D.W. Brown, B. Clausen, V. Seetharaman and B.S. Majumdar, "Internal Stress Evolution in a [001] Oriented Directionally Solidified Superalloy During Creep", proceedings of Materials Science and Technology 2005, Pittsburgh, PA, United States, pp. 213-229, 2005.
  190. T.A. Saleh, B. Clausen, D.W. Brown, H. Choo, P.K. Liaw, M.A.M. Bourke, S.C. Vogel, R.A. Buchanan and D.L. Klarstrom, "In-Situ Neutron Diffraction Studies of Carbide-Matrix Interactions in HAYNES 230 Nickel Based Superalloy", MRS Symp. Proc., vol. 840, pp.187-192, 2005. (Link)
  191. T. Proffen, K.L. Page, S.E. McLain, B. Clausen, T.W. Darling, J.A. TenCate, S.-Y. Lee and E. Üstündag, "Atomic Pair Distribution Function Analysis of Materials Containing Crystalline and Amorphous Phases", Zeitschrift für Kristallographie, vol. 220(12), pp. 1002-1008, 2005. (DOI)
  192. S. Li, M.A.M Bourke, I.J. Beyerlein, D.J. Alexander and B. Clausen, "Finite Element Analysis of the Plastic Deformation Zone and Working Load in Equal Channel Angular Extrusion", Mat. Sci. & Eng. A, vol. 382(1-2), pp. 217-236, 2004. (DOI)
  193. C. Larsson, B. Clausen, T. Holden and M.A.M. Bourke, "Measurements and Predictions of Strain Pole Figures for Uniaxially Compressed Stainless Steel", Scripta Materialia, vol. 51, pp.571-575, 2004. (DOI)
  194. T.W. Darling, J.A. TenCate, D.W. Brown, B. Clausen and S.C. Vogel, "Neutron Diffraction Study of the Contribution of Grain Contacts to Nonlinear Stress-strain Behavior", Geophysical Res. Let., vol. 31(16), p. L16604, 2004. (DOI)
  195. N.C. Popa, D. Balzar, G. Stefanic, S. Vogel, D. Brown, M. Bourke and B. Clausen, "Residual-Strain Determination by Least-Squares Refinement of TOF Neutron-Diffraction Measurements of Deformed Uranium", Adv. X-Ray Anal., vol. 47, pp. 373-378, 2004. (pdf)
  196. C.R. Rathod, V. Livescu, B. Clausen, M.A.M. Bourke, W.U. Notardonato, M. Femminineo and R. Vaidyanathan, "Neutron Diffraction Characterization of Residual Strain in Welded Inconel 718 For NASA Space Shuttle Flow Liners", AIP Conference Proceedings, vol. 711, pp. 167-175, 2004. (DOI)
  197. V. Livescu, T.R. Woodruff, B. Clausen, T. Sisneros, M.A.M. Bourke, W.U. Notardonato and R. Vaidyanathan, "Design and Rationale for an In-situ Cryogenic Deformation Capability at a Neutron Source", AIP Conference Proceedings, vol. 711, pp. 83-89, 2004. (DOI)
  198. B. Clausen, T. Leffers and T. Lorentzen, "On the Proper Selection of Reflections for the Measurement of Bulk Residual Stresses by Diffraction Methods", Acta Materialia, vol. 51(20), pp.6181-6188, 2003. (DOI)
  199. D.W. Brown, M.A.M. Bourke, B. Clausen, T.M. Holden, C.N. Tomé and R. Varma, "A Neutron Diffraction and Modeling Study of Uniaxial Deformation in Polycrystalline Beryllium", Metall. Trans. A, vol. 34(7), pp. 1439-1449, 2003. (DOI)
  200. B. Clausen, S.-Y. Lee, E. Üstündag, C.C. Aydiner, R.D. Conner and M.A.M. Bourke, "Compressive Yielding of Tungsten Fiber Reinforced Bulk Metallic Glass Composites", Scripta Materalia, vol. 49(2), pp. 123-128, 2003. (DOI)
  201. R.C. Rogan, E. Üstündag, B. Clausen and M.R. Daymond, "Texture and Strain Analysis of the Ferroelastic Behavior of Pb(Zr,Ti)O3 by In Situ Neutron Diffraction", J. Appl. Phys., vol. 93(7), pp. 4104-4111, 2003. (DOI)
  202. G.A. Swift, E. Üstündag, B. Clausen, M.A.M. Bourke and H.-T. Lin, "High-Temperature Elastic Properties of In Situ-Reinforced Si3N4", Appl. Phys. Lett., vol. 82(7), pp. 1039-1041, 2003. (DOI)
  203. G.A. Swift, E. Üstündag, B. Clausen, M.A.M. Bourke, H.-T. Lin and C.W. Li, "High Temperature Elastic Strain Evolution in Si3N4- Based Ceramics", Adv. X-Ray Anal., vol. 46, pp. 130-135, 2003. (pdf)
  204. G.A. Swift, E. Üstündag, B. Clausen, M.A.M. Bourke, H.-T. Lin and C.W. Li, "High-Temperature Deformation of Silicon Nitride and its Composites", Ceramic Trans., vol. 142, pp. 145-157, 2003. (Link)
  205. G. Vaschenko, C.S. Menoni, D. Patel, C.N Tomé, B. Clausen, N.F. Gardner, J. Sun, W. Gotz, H.M. Ng and A.Y. Cho, "Nonlinear Polarization in Nitrides Revealed with Hydrostatic Pressure", Physica Status Solidi B, vol. 235(2), pp.238-247, 2003. (DOI)
  206. S.C. Vogel, D.J. Alexander, I.J. Beyerlein, M.A.M. Bourke, D.W. Brown, B. Clausen, C.N. Tomé, R.B. Von Dreele, C. Xu and T.G. Langdon, "Investigation of Texture in ECAP Materials Using Neutron Diffraction", Materials Science Forum, vol. 426(4), pp. 2661-2666, 2003. (DOI)
  207. R.C. Rogan, E. Üstündag, B. Clausen and M.R. Daymond, "In-situ neutron diffration study of the ferroelastic behavior of Pb(Zr,Ti)O-3", Ceramic Trans., vol. 136, pp. 65-74, 2003. (Link)
  208. M.E. Manley, B. Fultz, D.W. Brown, B. Clausen, A.C. Lawson, J.C. Cooley, W.L. Hults, R.J. Hanrahan, J.L. Smith and D.J. Thoma, "Microstructural Strain Energy of Alpha-Uranium Determined by Calorimetry and Neutron Diffractometry", Physical Review B, vol. 66(2), p. 024117/1-7, 2002. (DOI)
  209. T. Lorentzen, M.R. Daymond, B. Clausen and C.N. Tomé, "Lattice Strain Evolution During Cyclic Loading of Stainless Steel", Acta Mater., vol. 50(6), pp. 1627-38, 2002. (DOI)
  210. J.C. Hanan, G.A. Swift, E. Üstündag, I.J. Beyerlein, B. Clausen, J.D. Almer, U. Lienert and D.R. Haeffner, "Damage Evolution in Ti-SiC Unidirectional Fiber Composites", Adv. X-Ray Anal., vol. 45, pp. 251-256, 2002. (pdf)
  211. J.C. Hanan, E. Üstündag, I.J. Beyerlein, G.A. Swift, B. Clausen, D.W. Brown and M.A.M. Bourke, "Elastic Strain Evolution in Single-Fiber Metal Matrix Composites Under Tensile Loading", Adv. X-Ray Anal., vol. 45, pp. 245-250, 2002. (pdf)
  212. J.C. Hanan, B. Clausen, G.A. Swift, E. Üstündag, I.J. Beyerlein, J.D. Almer, U. Lienert and D.R. Haeffner, "Microscale Residual Strains in Monolayer Unidirectional Fiber Composites", ECRS 6, Mater. Sci. Forum, vol. 404(4), pp. 913-918, 2002. (DOI)
  213. J.C. Hanan, E. Üstündag, B. Clausen, M. Sivasambu, I.J. Beyerlein, D.W. Brown and M.A.M. Bourke, "Residual Strain Evolution During the Deformation of Single Fiber Metal Matrix Composites", ECRS 6, Mater. Sci. Forum, vol. 404(4) pp. 907-912, 2002. (DOI)
  214. B. Clausen, R.C. Rogan, E. Üstündag, M.R. Daymond and V. Knoblauch, "Ferroelastic Behavior of PZT-based Ferroelectric Ceramics", ECRS 6, Mater. Sci. Forum, vol. 404(4), pp. 413-418, 2002. (DOI)
  215. B. Clausen, S.-Y. Lee, E. Üstündag, C.P. Kim, D.W. Brown and M.A.M. Bourke, "Deformation of In Situ-Reinforced Bulk Metallic Glass Matrix Composites", ECRS 6, Mater. Sci. Forum, vol. 404(4), pp. 553-558, 2002. (DOI)
  216. G. Vaschenko, D. Patel, C.S. Menoni, N.F. Gardner, J. Sun, W. Gotz, C.N. Tomé and B. Clausen, "Significant Strain Dependence of Piezoelectric Constants in InxGa1-xN/GaN Quantum Wells", Physical Review B, vol. 64(24), p.241308/1-4, 2001. (DOI)
  217. G. Vaschenko, D. Patel, C.S. Menoni, N.F. Gardner, J. Sun, W. Gotz, C.N. Tomé and B. Clausen, "Pressure Dependence of Piezoelectric Field in InGaN/GaN Quantum Wells", Physica Status Solidi B, vol. 228(1), p.73-6E, 2001. (DOI)
  218. D. Dragoi, E. Üstündag, B. Clausen and M.A.M. Bourke, "Investigation of Thermal Residual Stresses in Tungsten-Fiber/Bulk Metallic Glass Matrix Composites", Scripta Mat., vol. 45(2), pp. 245-252, 2001. (DOI)
  219. B. Clausen and M.A.M. Bourke, "Lattice Plane Response During Tensile Loading Of An Aluminum 2% Magnesium Alloy", Metall. Trans. A, vol. 32(3), pp. 691-694, 2001 (DOI)
  220. E. Üstündag, D. Dragoi, B. Clausen, D.W. Brown, M.A.M. Bourke, D.K. Balch and D.C. Dunand, "Internal Stresses in Bulk Metallic Glass Matrix Composites", Proceedings of the Supercooled Liquid, Bulk Glassy and Nanocrystalline States of Alloys Symposium, Boston, MA, USA, pp. L9.3.1-6, 2000. (DOI)
  221. B. Clausen, E. Üstündag and M.A.M. Bourke, "Investigation of the Reduction of NiAl2O4", Adv. X-Ray Anal., vol. 44, pp. 32-37, 2001. (pdf)
  222. D. Dragoi, E. Üstündag, B. Clausen and M.A.M. Bourke, "Residual Stresses in Tungsten / Bulk Metallic Glass Composites", Adv. X-Ray Anal., vol. 44, pp. 168-173, 2001. (pdf)
  223. D.W. Brown, R. Varma, M.A.M. Bourke, P. Burgardt, S. Spooner, T. Ely, M.R. Daymond and B. Clausen, "Residual Strains In A Pigma Welded Beryllium Rings", Adv. X-Ray Anal., vol. 44, pp. 162-167, 2001. (pdf)
  224. S. Jayawardana, G.V. Garcia, H. Nakotte, B. Clausen and M.A.M. Bourke, "Finite Element Modeling of Anisotropic Properties of Cu-Ag Metal Matrix Composites", IEEE Transactions On Applied Superconductivity, vol. 10(1) pp. 1281-1283, 2000. (DOI)
  225. E. Üstündag, B. Clausen and M.A.M. Bourke, "Neutron Diffraction Study of the Reduction of NiAl2O4", Appl. Phys. Lett., vol. 76(6), pp. 694-696, 2000. (DOI)
  226. B. Clausen, T. Leffers, T. Lorentzen, O.B. Pedersen and P. Van Houtte, "The Resolved Shear Stress on the Non-Active Slip Systems in Taylor/Bishop-Hill Models for FCC Polycrystals", Scripta Materialia, vol. 42(1), pp. 91-96, 2000. (DOI)
  227. E. Üstündag, J.C. Hanan, B. Clausen and M.A.M. Bourke, "Investigation of the Reduction of NiAl2O4 Using Neutron Powder Diffraction", ICRS-6, Proceedings of the Sixth International Conference on Residual Stresses, (2000). (Link)
  228. E. Üstündag, C.C. Aydiner, D. Dragoi, B. Clausen, M.A.M. Bourke and R.A. Winholtz, "Residual Stresses in Bulk Metallic Glasses and Composites", ICRS-6, Proceedings of the Sixth International Conference on Residual Stresses, (2000). (Link)
  229. P. Rangaswamy, M.B. Prime, M. Daymond, M.A.M. Bourke, B. Clausen, H. Choo and N. Jayaraman. "Comparison of Residual Strains measured by X-ray and Neutron diffraction in Titanium Matrix Composites." Mat. Sci. & Eng. A, vol. 259(2), pp. 209-219, 1999. (DOI)
  230. B. Clausen, T. Lorentzen, M.A.M. Bourke and M.R. Daymond, "Lattice Strain Evolution During Uniaxial Loading of Stainless Steel", Mat. Sci. & Eng. A, vol. 259(1), pp. 17-24, 1999. (DOI)
  231. B.K. Kad, R.J. Asaro, B. Clausen and M.A.M. Bourke, "Neutron Diffraction Measurements of Internal Strains in TiAl-based Alloys", Gamma Titanium Aluminides 1999, pp.169-174, 1999. (Link)
  232. E. Üstündag, B. Clausen, J.C. Hanan, M.A.M. Bourke, R.A. Winholtz and A. Peker, "Residual Stresses in Bulk Metallic Glasses due to Differential Cooling or Thermal Tempering", MRS Symp. Proc., vol. 554, pp. 431-436, 1999. (DOI)
  233. E. Üstündag, R.H. Woodman, J.C. Hanan, B. Clausen, T. Hartmann and M.A.M. Bourke, "Neutron Diffraction Studies of the Partial Reduction of NiAl2O3: Phase and Strain Evolution", Ceramic Transactions, vol. 94, pp.537-548, 1999.
  234. B. Clausen and M.A.M. Bourke, "Microstructural Stress Strain Inhomogeneity in MMCs", in Nondestructive Evaluation (NDE) and Material Properties IV, pp.15-19, Proceedings of the TMS Annual Meeting 1999. (Link)
  235. G. Winther, T. Leffers and B. Clausen, "Revision of the Concept of 1-Site Models." Proceedings. ICOTOM-12, Ed. J.A. Szpunar. Vol. 1, pp. 399-404, 1999. (Link)
  236. M.A.M. Bourke, D.W. Brown, B. Clausen, H. Choo, P. Rangaswamy and R. Vaidyanathan, "Neutron Diffraction Studies of Polycrystalline Deformation in Engineering Materials", Neutron News, vol. 10(4), 1999, (DOI)
  237. B. Clausen, T. Lorentzen and T. Leffers, "Self-consistent Modelling of the Plastic Deformation of FCC Polycrystals and its Implications for Diffraction Measurements of Internal Stresses." Acta Mater., vol. 46(9), pp. 3087-3098, 1998. (DOI)
  238. T. Lorentzen, T. Faurholdt, B. Clausen and J. Danckert. "Characterisation of Residual Stresses Generated During Inhomogeneous Plastic Deformation." Int. Journal of Strain Analysis for Eng. Design, vol. 33(3), pp. 243-252, 1998. (pdf)
  239. B. Clausen, E. Üstündag, P. Rangaswamy, M.A.M. Bourke, S.L. Sass and T.J. Barbieri. "Investigation of the Reduction of NiAl2O4 - II: X-ray Diffraction Studies", Ceram. Eng. & Sci. Proceedings (ed. D. Bray), vol. 19(3), pp. 557-564, 1998. (DOI)
  240. E. Üstündag, J.C. Hanan, B. Clausen, M.A.M. Bourke, S.L. Sass and T.J. Barbieri. "Investigation of the Reduction of NiAl2O4 - I: Neutron Diffraction Studies", Ceram. Eng. & Sci. Proceedings (ed. D. Bray), vol. 19(3), pp. 549-556, 1998. (DOI)
  241. T. Lorentzen and B. Clausen. "Self-consistent Modelling of Lattice Strain Response and Development of Inter granular Residual Strains. Proceedings of the 5th International Conference on Residual Stresses (ICRS-5), Linkoeping, Sweden. Edited by T. Eriksson, M. Oden and A. Anderson, Institute of Technology, Linkoeping University, pp. 454-459, 1998. (Link)
  242. T. Lorentzen, T. Leffers and B. Clausen, "Polycrystal Models and Intergranular Stresses", in Modeling of Structure and Mechanics of Materials from Microscale to Product (Eds. J.V. Carstensen et al.). Risø National Laboratory, Roskilde, 1998, pp. 345-354. (Link)
  243. B. Clausen and T. Lorentzen. "Experimental Evaluation of a Polycrystal Deformation Modelling Scheme using Neutron Diffraction Measurements." Metall. Trans. A, vol. 28, pp. 2537-2541, 1997. (DOI)
  244. M.R. Daymond, M.A.M. Bourke, R. Von Dreele, B. Clausen and T. Lorentzen. "Use of Rietveld Refinement for Elastic Macrostrain Determination and for the Evaluation of Plastic Strain History from Diffraction Spectra." J. App. Phys., vol. 82(4), pp. 1554-1562, 1997. (DOI)
  245. P.S. From, R. Pyrz, B. Clausen and E.Ø. Nielsen. "Indentation and Acoustic Emission in Filtration Processed Platelet Reinforced Ceramic." Mat. Sci. & Eng. A, vol. 197, pp. 231-236, 1995. (DOI)

For extra information on publications, including h-index, i10-index and citation statistics, see personal Google Scholar, ResearchGate, ORCID and/or ResearcherID profiles

Reports
  1. M.A. Stroud, M.B. Prime, D.K. Veirs, J.M. Berg, B. Clausen, L.A. Worl and A.T. DeWald, "Assessment of Residual Stresses in 3013 Inner and Outer Containers and Teardrop Samples", LA-UR-15-29376, Los Alamos National Lab.(LANL), Los Alamos, NM (United States) (link)
  2. E.A. Magnuson, D.W. Brown, B. Clausen, T.A. Sisneros, J.-S.Park, "Characterization of beryllium deformation using in-situ x-ray diffraction", LA-UR-15-26653, Los Alamos National Lab.(LANL), Los Alamos, NM (United States) (link)
  3. D.W. Brown, B. Clausen, T.A. Sisneros and M.A. Okuniewski, "Neutron Diffraction Measurement of Residual Stresses in OSU Plate", LA-UR-13-24618, Los Alamos National Lab.(LANL), Los Alamos, NM (United States) (link)
  4. B. Clausen. "Characterisation of Polycrystal Deformation by Numerical Predictions and Neutron Diffraction Experiments." Thesis, Risø-R-985(EN) Risø National Laboratory, DK-4000 Roskilde, Denmark, 1997. (RIS-R-985.pdf) (Link)
  5. B. Clausen and T. Lorentzen. "A Self-consistent Model for Polycrystal Deformation, Description and Implementation." Risø-R-970(EN) Risø National Laboratory, DK-4000 Roskilde, Denmark, 1997. (RIS-R-970.pdf) Sc_model.zip Taylor_Sachs.zip (Link)

Awards
  1. Los Alamos Awards Program, 2016: "For High Pressure Pu Experiments at the Lujan Center".
  2. American Iron and Steel Institute 2013 Finalist Medal: P. Gibbs, E. De Moor, M.J. Merwin, B. Clausen, J.G. Speer and D.K. Matlock, "Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel", Metall. Mater. Trans. A, vol. 42(12), pp. 3691-3702, 2011. (DOI)
  3. 2nd Prize at the 2011 Journal of Materials Science Sapphire Prize: G. Bruno, A.M. Efremov, A.N. Levandovskyi and B. Clausen, "Connecting the Macro- and Microstrain Responses in Technical Porous Ceramics: Modeling and Experimental Validations", J. Mater. Sci., vol. 46(1), pp. 161-173, 2011. (DOI)
  4. Los Alamos Awards Program, 2011: "For Preparation and In-Situ Loading Measurements on Activated Samples".
  5. Defense Programs Award of Excellence, 2011: "For Deformation Physics Based Uranium Component Modeling".
  6. Defense Programs Award of Excellence, 2005: "For In-Situ Measurements of Crystalline Lattice Strains in Polytetraflouroethylene".
  7. Defense Programs Award of Excellence, 2003: "For Unique Charracterization of Uranium Alloy Properties Using Neutron Diffraction".
  8. MST Division Review Poster Session, First Place, 2000: "A Study of a Reduction Reaction and its Potential for Tempering a Ceramic".


Operated by the Los Alamos National Security LLC for the National Nuclear Security Administration of the US Department of Energy.     Copyright ©     Disclaimer/Privacy